Honda DC2 Stereo Remove and Replace                             

 

 


Disclaimer: The following is provided as a GUIDE ONLY, I do not  take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


Aim: remove radio from a DC2 Integra.
Required: Philips head screw driver, flat head screw driver,
step 1
undo the 2 x screws at the back of the center consol, one either side



Step 2

using a flat head screw driver gently lift the cover



Step 3
undo the two screws



Step 4
Lift the handbrake lever and lift out the center console, Remove the ash tray and Undo the two screws shown below one either side. remove the gearshift knob , turn anti clockwise





Step 5

Undo the two screws shown below.





Step 6

remove the ashtray assembly, and undo the wiring harness holding it on ( see
blue arrow ) then remove the two screws ( green arrows )




Step 7

pull out console.




Step 8

undo the radio screws under the back of the radio





pull the radio out, replace with new one and reinstall in reveres order.

happy stereo removal

Disclaimer: The following is provided as a GUIDE ONLY, I do not  take any responsibility for the outcomes of someone else doing the following. You follow these steps at your own risk!


View My Stats